Skip to main content

Create and use QR codes

COVID SAfe Check-in

Operators in the point-to-point industry must now make sure that their vehicle has a unique COVID SAfe Check-In QR code.

This includes taxi, ride-share and chauffeur vehicle operators.

Point-to-point community’s legal responsibilities in using COVID SAfe Check-In QR codes

Vehicle operators (any person or entity responsible for the operation of a point-to-point service (taxi, rideshare or chauffeur service) who own or lease point-to-point vehicle(s) are responsible for:

  • creating a QR code(s) for their vehicle(s)
  • making sure each of their vehicles are equipped with their own unique QR code.

Drivers (a person accredited to drive a point-to-point service under the Passenger Transport Act 1994) are responsible for:

  • checking in via the QR code at the beginning and end of their shift
  • asking or encouraging passengers to check in via QR code.

Operators who are also drivers (such as a rideshare driver) are responsible for:

  • creating and installing the QR code in their vehicle
  • checking in via the QR code at the beginning and end of their shift
  • asking or encouraging passengers to check in via QR code.

Passengers are responsible for:

  • checking in via QR code in a point-to-point vehicle.

The Government of South Australia will take a best-endeavours and education-based approach to compliance.

Steps to create a QR code

Vehicle operators can create their own QR code by creating a COVID SAfe plan for their vehicle online in 5 minutes at the SA COVID-19 website by following these steps:

Step 1: Create a COVID-Safe Plan

Step 1: Create a COVID-Safe plan

Click the ‘Create the COVID-Safe Plan form’ button on the SA COVID-19 website.

When filling out the online form, operators must pay close attention to the following things:

  • At "Name of business or organisation", you must write: 'P2P', then a space, followed by the vehicle's number plate.
    For example: P2P S279AVB
  • At "Select your business or activity type", you must select 'Point-to-point transport'.
  • You must provide the correct name, mobile number, email address and home address. It is important for COVID-19 contact tracing that this information is correct so that SA Health are able to contact people who have been exposed to the COVID-19 virus, including drivers.
  • Drivers’ contact details do not need to be listed in the COVID-Safe Plan. Their details will be captured each time they use the QR code to check into the vehicle at the beginning and end of their shift.

Step 2: Print QR code

Step 2: Print QR code

When operators have completed the form, their full COVID-Safe Plan and QR code will be emailed to their email address.

Operators must then print their QR code for setting it up in your vehicle. It is recommended that you print three copies of your QR code per vehicle.

Please note:

  • if a driver is unsure if a QR code has already been created for the vehicle they will be using, they can check with their operator in the first instance.
  • if an operator is unsure if a QR code has already been created for the vehicle, they can check by emailing forms@sa.gov.au and referencing the number plate.

Step 3: Set up QR code in the vehicle

Step 3: Setup QR code in vehicle

Set the following copies up in the locations outlined below and fasten them well:

  1. One copy on the inside of the driver's door. This QR code should only be used by vehicle drivers to check in; and
  2. At least one of the following so that passengers can easily scan the QR code:
    • One copy on the inside of each rear passenger door; or
    • One copy on the back of each front seat; or
    • One copy on the inside of each small, rear fixed passenger window that does not wind up or down. The QR code on this window should be as low and close to the rear of the car as possible and within passenger reach.
  3. You are allowed to cut out your QR code from its page so that it is smaller in size and easier to use/fasten. You can also print your QR code as a sticker.

You are allowed to cut out your QR code from its page so that it is smaller in size and easier to use/fasten. You can also print your QR code as a sticker.

Note: You are not allowed to use a different QR code system than the Government-mandated COVID SAfe Check-In system.

Step 4: Check in

Step 4: Check-in

When the QR code is set up in a vehicle, drivers must:

  • check in at the beginning and at the end of their shift. This is especially important if vehicles are used by more than one driver.
  • encourage or ask passengers to please check in after they have sat down in the vehicle, but they do not have to refuse service or take any action if passengers cannot or refuse to check in.

More information

  • EXPERIMENTS